• Corrosion resistance, high temperature resistance, wear resistance, effectively damp-proof, mildew-proof, easy to scrub.
• Application: kitchen stove, dish washing, corner sealing between ceramic tile and wall.1. Thoroughly remove the original silicone sealant with the knife.
• 2. Use organic solvents (thinner), such as rubber water, gasoline, etc., to clear the surface residue.
• 3. The surface is completely dry.
• 4. Installation indoor temperature is better around 25 degree Celsius, too cold place can be heated by electric hair dryer viscose, then paste.
• 5. Remove the plastic film on the back of, fold it to 90 degrees, and paste it on the bathtub and the wall surface.
• 6. 90 degrees turn when the corner of the paste, the docking side should be cut into 45 degrees to the interface.
• 7. After compaction, 8 hours to 10 hours later can be used.1. Thoroughly remove the original silicone sealant with the knife.
• 2. Use organic solvents (thinner), such as rubber water, gasoline, etc., to clear the surface residue.
• 3. The surface is completely dry.
• 4. Installation indoor temperature is better around 25 degree Celsius, too cold place can be heated by electric hair dryer viscose, then paste.
• 5. Remove the plastic film on the back of, fold it to 90 degrees, and paste it on the bathtub and the wall surface.
• 6. 90 degrees turn when the corner of the paste, the docking side should be cut into 45 degrees to the interface.
• 7. After compaction, 8 hours to 10 hours later can be used.1. Thoroughly remove the original silicone sealant with the knife.
• 2. Use organic solvents (thinner), such as rubber water, gasoline, etc., to clear the surface residue.
• 3. The surface is completely dry.
• 4. Installation indoor temperature is better around 25 degree Celsius, too cold place can be heated by electric hair dryer viscose, then paste.
• 5. Remove the plastic film on the back of, fold it to 90 degrees, and paste it on the bathtub and the wall surface.
• 6. 90 degrees turn when the corner of the paste, the docking side should be cut into 45 degrees to the interface.
• 7. After compaction, 8 hours to 10 hours later can be used.1. Thoroughly remove the original silicone sealant with the knife.
• 2. Use organic solvents (thinner), such as rubber water, gasoline, etc., to clear the surface residue.
• 3. The surface is completely dry.
• 4. Installation indoor temperature is better around 25 degree Celsius, too cold place can be heated by electric hair dryer viscose, then paste.
• 5. Remove the plastic film on the back of, fold it to 90 degrees, and paste it on the bathtub and the wall surface.
• 6. 90 degrees turn when the corner of the paste, the docking side should be cut into 45 degrees to the interface.
• 7. After compaction, 8 hours to 10 hours later can be used.